Author(s):
Heba A. Yassin, Mohamed A. Sharaf, Hanna A. El-Ghamry, Abdelaziz E. Abdelaziz
Email(s):
espeldin2@gmail.com
DOI:
10.52711/0974-360X.2023.00824 
Address:
Heba A. Yassin1, Mohamed A. Sharaf2, Hanna A. El-Ghamry2, Abdelaziz E. Abdelaziz3
1Pharmaceutical Technology Department, Faculty of Pharmacy, Al-Salam University, Tanta, Egypt.
2Pharmaceutical Technology Department, Faculty of Pharmacy, Zagazig University, Zagazig, Egypt.
3PharmaceuticalTechnology Department, Faculty of Pharmacy, Kafrelsheikh University, Kafrelsheikh, Egypt.
*Corresponding Author
Published In:
Volume - 16,
Issue - 11,
Year - 2023
ABSTRACT:
The aim of the current study was to scale up controlled release matrix tablets of Dyphylline, used for the management of various respiratory conditions such as asthma, cardiac dyspnea, chronic bronchitis, and emphysema. The tablets were scaled up to 3500 tablets scale then the optimized formulations were further scaled up to 35000 tablets. Tablets were manufactured using direct compression, wet granulation, and hot melt methods. The prepared tablets were evaluated for Hardness, Friability, content uniformity, in-vitro drug release, and stability study. The results obtained showed that the ten prepared tablets showed accepted values for the hardness, friability, and content uniformity tests. The formulations showed controlled drug release profiles with high similarity to our target release profile (f values ranged from 63.9 to 84.9). The release profiles showed a better fit to zero order than diffusion model. The Exponent n of Korsmeyer-Peppas model ranged from 0.67 to 0.692 indicating non-Fickian diffusion. The stability study indicating good stability of the selected formulation. All these results concluded that formulation prepared by wet granulation can be manufactured on large scale perfectly.
Cite this article:
Heba A. Yassin, Mohamed A. Sharaf, Hanna A. El-Ghamry, Abdelaziz E. Abdelaziz. Scaling up and evaluation of Dyphylline controlled release matrix tablets. Research Journal of Pharmacy and Technology. 2023; 16(11):5085-0. doi: 10.52711/0974-360X.2023.00824
Cite(Electronic):
Heba A. Yassin, Mohamed A. Sharaf, Hanna A. El-Ghamry, Abdelaziz E. Abdelaziz. Scaling up and evaluation of Dyphylline controlled release matrix tablets. Research Journal of Pharmacy and Technology. 2023; 16(11):5085-0. doi: 10.52711/0974-360X.2023.00824 Available on: https://rjptonline.org/AbstractView.aspx?PID=2023-16-11-18
REFERENCES:
1. Arshad, M. S.; Zafar, S.; Yousef, B.; Alyassin, Y.; Ali, R.; AlAsiri, A.; Chang, M.-W.; Ahmad, Z.; Elkordy, A. A.; Faheem, A. A review of emerging technologies enabling improved solid oral dosage form manufacturing and processing. Advanced Drug Delivery Reviews. 2021; 178: 113840. https://doi.org/10.1016/j.addr.2021.113840
2. Goudanavar, P.; Hiremath, D.; Spandana, D.; Reddy, S. Development and evaluation of fast disintegrating tablets of granisetron HCl with natural and synthetic polymers. Asian Journal of Pharmaceutical Research. 2011; 1: 72-77.
3. Sharma, S.; Patil, A. B.; Gowda, D. Pilot plant scale up for tablet. Research Journal of Pharmacy and Technology. 2020; 13: 4973-4980. DOI : 10.5958/0974-360X.2020.00872.0
4. Madanayake, S. N.; Manipura, A.; Thakuria, R.; Adassooriya, N. M. Opportunities and Challenges in Mechanochemical Cocrystallization toward Scaled-Up Pharmaceutical Manufacturing. Organic Process Research and Development. 2023. https://doi.org/10.1021/acs.oprd.2c00314
5. Siddam, H.; Kotla, N. G.; Maddiboyina, B.; Singh, S.; Sunnapu, O.; Kumar, A.; Sharma, D., Formulation and evaluation of atenolol floating bioadhesive system using optimized polymer blends. International Journal of Pharmaceutical Investigation. 2016; 6: 116. doi: 10.4103/2230-973X.177832
6. Sravanthi, N.; Alekhya, K.; Punitha, S., Formulation and Process Scale up of Misoprostol Tablets. Research Journal of Pharmacy and Technology. 2011; 4: 1673-1675.
7. Sri, K. V.; Reddy, R.; Mahesh, R., Diphendramine Hydrochloride Oral Dispersible Tablets: Preparation and Evaluation. Asian Journal of Pharmaceutical Research. 2014; 4: 123-128.
8. Gardouh, A. R.; El-Din, A. S.; Mostafa, Y.; Gad, S. Starch Nanoparticles Preparation and Characterization by in situ combination of Sono-precipitation and Alkali hydrolysis under Ambient Temperature. Research Journal of Pharmacy and Technology. 2021; 14: 3543-3552. Article DOI: 10.52711/0974-360X.2021.00614
9. Gardouh, A. R.; Srag El-Din, A. S. G.; Salem, M. S. H.; Moustafa, Y.; Gad, S. Starch Nanoparticles for Enhancement of Oral Bioavailability of a Newly Synthesized Thienopyrimidine Derivative with Anti-Proliferative Activity Against Pancreatic Cancer. Drug Des Devel Ther. 2021; 15: 3071-3093. DOI: 10.2147/dddt.s321962
10. Samuel, G.; Nazim, U.; El-Din, A. S. Physicochemical characterization of Novel Particulate Delivery Systems for Antitumor/metastatic Therapeutics. Research Journal of Pharmacy and Technology. 2021; 14: 4837-4844. Article DOI : 10.52711/0974-360X.2021.00840
11. Gardouh, A.; Srag El-Din, A. S.; Moustafa, Y.; Gad, S. Formulation factors of starch-based nanosystems preparation and their pharmaceutical application. Records of Pharmaceutical and Biomedical Sciences. 2021; 5: 28-39. DOI: 10.21608/RPBS.2020.51097.1080
12. Srag El-Din, A. Azithromycin loaded chitosan nanoparticles preparation and in-vitro characterization. Delta University Scientific Journal. 2022; 5: 214-225. DOI: 10.21608/dusj.2022.275433
13. Kumari, S.; Kumar, R.; Shetty, P.; Suvarna, P.; Swamy, N. V. Formulation and Evaluation of Gastro Retentive Matrix Tablets of Sitagliptin. Asian Journal of Research in Pharmaceutical Science. 2016; 6: 1-14. Article DOI : 10.5958/2231-5659.2016.00001.1
14. Rajpoot, S.; Saqib, U.; Baig, M. S. Repurposing dyphylline as a pan-coronavirus antiviral therapy. 2022. https://doi.org/10.4155/fmc-2021-0311
15. Ti, H.; Zhou, Y.; Liang, X.; Li, R.; Ding, K.; Zhao, X. Targeted treatments for chronic obstructive pulmonary disease (COPD) using low-molecular-weight drugs (LMWDs). Journal of Medicinal Chemistry. 2019; 62: 5944-5978. https://doi.org/10.1080/07391102.2022.2085802
16. Satish, M.; Sandhya, K.; Nitin, K.; Yashas Kiran, N.; Aleena, B.; Satish Kumar, A.; Rajakumara, E. Computational, biochemical and ex vivo evaluation of xanthine derivatives against phosphodiesterases to enhance the sperm motility. Journal of Biomolecular Structure and Dynamics. 2022: 1-11. https://doi.org/10.1080/07391102.2022.2085802
17. Bhakta, N. R.; Choo, E., 20. Drugs Used in Asthma and amp; Chronic Obstructive Pulmonary Disease.
18. Acosta, W. R., Pharmacology for health professionals. Jones and Bartlett Learning: 2020.
19. Osamura, T.; Takeuchi, Y.; Onodera, R.; Kitamura, M.; Takahashi, Y.; Tahara, K.; Takeuchi, H. Formulation design of granules prepared by wet granulation method using a multi-functional single-punch tablet press to avoid tableting failures. Asian Journal of Pharmaceutical Sciences. 2018; 13: 113-119. https://doi.org/10.1016/j.ajps.2017.08.002
20. Singh, B. N. Product development, manufacturing, and packaging of solid dosage forms under QbD and PAT paradigm: DOE case studies for industrial applications. AAPS Pharm SciTech. 2019; 20: 313. https://doi.org/10.1208/s12249-019-1515-8
21. Naveed, S.; Dilshad, H.; Qamar, F. Manufacturing of new formulation of Pyridoxine HCL by direct compression method. J Sci Innov Res. 2014; 3: 450-453.
22. Liu, B.; Wang, J.; Zeng, J.; Zhao, L.; Wang, Y.; Feng, Y.; Du, R. A review of high shear wet granulation for better process understanding, control and product development. Powder Technology. 2021; 381: 204-223. https://doi.org/10.1016/j.powtec.2020.11.051
23. Ma, X.; Huang, S.; Lowinger, M. B.; Liu, X.; Lu, X.; Su, Y.; Williams III, R. O. Influence of mechanical and thermal energy on nifedipine amorphous solid dispersions prepared by hot melt extrusion: Preparation and physical stability. International Journal of Pharmaceutics. 2019; 561: 324-334. https://doi.org/10.1016/j.ijpharm.2019.03.014
24. Vishali, T.; Damodharan, N. Orodispersible tablets: A review. Research Journal of Pharmacy and Technology. 2020; 13: 2522-2529. Article DOI : 10.5958/0974-360X.2020.00449.7
25. Raziq, A.; Jan, S. U.; Gul, R.; Khan, Y.; Aman, T.; Shah, P. A. Relative comparison of stability and degradation of methylcobalamine tablets of different brands at different storage settings. Int J Appl Pharm. 2021; 13: 171-5. DOI: 10.22159/ijap.2021v13i3.41263
26. Reddy, Y. K.; Asha, C. Formulation and Evaluation of Oral Controlled Release Matrix Tablets of Propranolol Hydrochloride. Asian Journal of Pharmaceutical Research. 2020; 10: 81-85. DOI : 10.5958/2231-5691.2020.00015.5
27. Carruthers, H.; Clark, D.; Clarke, F.; Faulds, K.; Graham, D. Comparison of Raman and near-infrared chemical mapping for the analysis of pharmaceutical tablets. Applied Spectroscopy. 2021; 75: 178-188. https://doi.org/10.1177/0003702820952440
28. Rajeswari, K. R.; Brungi, V.; Bennuru, S.; Cheeli, S.; Vankadari, R. Studies on the development of Orally Disintegrating Tablets of Irbesartan. Asian Journal of Pharmaceutical Research. 2020; 10: 1-7. DOI : 10.5958/2231-5691.2020.00001.5
29. Zidan, A.; Alayoubi, A.; Asfari, S.; Coburn, J.; Ghammraoui, B.; Aqueel, S.; Cruz, C. N.; Ashraf, M. Development of mechanistic models to identify critical formulation and process variables of pastes for 3D printing of modified release tablets. International Journal of Pharmaceutics. 2019; 555: 109-123. https://doi.org/10.1016/j.ijpharm.2018.11.044
30. Son Phan, K.; Thu Huong Le, T.; Minh Nguyen, T.; Thu Trang Mai, T.; Ha Hoang, P.; Thang To, X.; Trung Nguyen, T.; Dang Pham, K.; Thu Ha, P. Co‐delivery of Doxycycline, Florfenicol and Silver Nanoparticles using Alginate/Chitosan Nanocarriers. Chemistry Select. 2022; 7: e202201954. https://doi.org/10.1002/slct.202201954
31. Arora, G.; Malik, K.; Singh, I.; Arora, S.; Rana, V. Formulation and evaluation of controlled release matrix mucoadhesive tablets of domperidone using Salvia plebeian gum. Journal of Advanced Pharmaceutical Technology and Research. 2011; 2: 163. doi: 10.4103/2231-4040.85534