Author(s):
P. Vijetha, M. Jagadeesh Babu, J. Radheshyam
Email(s):
Email ID Not Available
DOI:
10.5958/0974-360X.2017.00700.4 
Address:
P. Vijetha*, M. Jagadeesh Babu , J. Radheshyam
*Department of Chemical Engineering, Vignan’s Foundation for Science, Technology and Research University (VFSTR Univ. VIGNAN UNIVERSITY), Vadlamudi, Guntur 522 213 Andhra Pradesh, INDIA.
*Corresponding Author
Published In:
Volume - 10,
Issue - 11,
Year - 2017
ABSTRACT:
In the present work, performance of an Air-Jet Mill was studied. Although jet mill has several advantages but it is still an energy intensive process as only 2% - 5% of the energy supplied is used to create new surfaces. In the present work some trial runs are performed by varying the operating parameters of the jetmill. Product quality is the factor which determines whether determines whether a specific grinding technique is appropriate. The roduct of a jet mill is a fine powder with a well defined and narrow particle size distribution. The RPM and blower alue conditions were varied and the results were tabulated. The optimum conditions for the desired quality and production rate of the jet mill in the plant are determined.
Cite this article:
P. Vijetha, M. Jagadeesh Babu , J. Radheshyam. Study on the Performance of an Air-Jet Mill by varying operating Parameters. Research J. Pharm. and Tech 2017; 10(11): 3860-3862. doi: 10.5958/0974-360X.2017.00700.4
Cite(Electronic):
P. Vijetha, M. Jagadeesh Babu , J. Radheshyam. Study on the Performance of an Air-Jet Mill by varying operating Parameters. Research J. Pharm. and Tech 2017; 10(11): 3860-3862. doi: 10.5958/0974-360X.2017.00700.4 Available on: https://rjptonline.org/AbstractView.aspx?PID=2017-10-11-39